Install Guide.

How to Apply Windscreen Banner.

 

1 Prep:

use a None Silicone product. to Clean Windscreen. 

We Recommend, Bowden's Windscreen Cleaner 

and you will need 2 Microfiber cloth. Use One to Clean,

And the Second to Remove any missed Dust/dirt.

To be Sure to have a well prepared surface.

 

2:  Prepare Banner:

Locate Center of the Banner by Folding it down the Middle of the 'A'. 

And now use Masking Tape to Locate Center of the windscreen.

Run a Line of Masking tape Across the Windscreen.

And then Fold it Back for Both Ends.

while Keeping the Masking tape still on the Windscreen. 

3 Locate Position:

By using a Tape Measure Find your Desired Height.                                                              And Aline the center Marks to be Centered Perfectly.

After Finding your Height and Locating center.

 use Masking Tape to Lock it into place

 

4 Apply Banner: 

peel the under side out pulling it to one side.

While also Using a card to rub the banner down to the Windscreen,

avoiding Air bubbles.  After Working all the way Along the Banner.

Now use your card to create a sharp Crease where the Banner meets

the Windscreen Seal.

5 Cut Out:

After Creating your sharp Crease Mark get your Razor Blade.

 and slowly cut Along the crease [NOT ON THE SEAL]

Peel excess material off After Cutting it Out. 

6 Removing top layer:

Using a Damp Microfiber cloth, To Help Separate material

and to Avoid Letters getting pulled with the top layer of material.

7 Completion:

Now take a Fully sick photo and post it on Instagram

and Tag us to be Featured @getajob_society